CNC 103: Making Inlays using VCarve Pro and CNC Router

  • Wednesday, September 21, 2022
  • Thursday, September 22, 2022
  • 2 sessions
  • Wednesday, September 21, 2022, 6:00 PM 8:00 PM (PDT)
  • Thursday, September 22, 2022, 6:00 PM 8:00 PM (PDT)
  • BARN ETA & Woodworking Studios, Class Code: WO+EL092122AE
  • 1

Registration

  • $130 Tuition + $30 Material Fee
  • $100 Tuition + $30 Material Fee

Registration is closed

This class has prerequisites. Please see below.

Use the VCarve Pro software program to design and cut an inlay on the Woodworking Studio's CNC router.  Each student will attend two sessions. For the first session, the class will meet in the Electronics & Technical Arts lab to review VCarve Pro, review/finalize design of inlay, and set up the CNC project.

The second session will be in the Woodworking Studio. Students will cut the materials (walnut and maple), and glue them up. The instructor will then show students how to cut off the excess inlay material and sand the inlays using a sample cut so students can do the same to their project at their leisure after the glue has dried.

Details:

  • Open to students 14 years old and older who have taken CNC 102: VCarve Pro for CNC RoutingPlease login to your BARN account and click on "My event registrations" to ensure you have completed the required prerequisites before you register for this class.
  • Please click here for BARN's current COVID-19 health & safety protocols. 
  • When you are working in the Woodworking Studio, you must wear safety glasses and closed-toe shoes, tie back long hair, and avoid loose-fitting clothing and jewelry. We recommend bringing your own safety glasses.
  • BARN is committed to accessibility. Tuition Assistance is available - click here to fill out the simple application before registering for a class. For those who might need physical assistance, please learn about BARN's Companion Program here.

Instructor: Al Ebken is a retired ocean engineer with many years of computer and computer-aided design experience. (In the picture, he's using the Woodworking Studio's CNC router to make parts for face shields to protect against coronavirus infection. Using VCarve Pro, he also made the hummingbird inlay shown in the top picture.)

© Bainbridge Artisan Resource Network
Powered by Wild Apricot Membership Software
/ /