Understanding CAM in Fusion 360 CAD/CAM for the Machine Shop

  • Tuesday, November 02, 2021
  • 6:00 PM - 8:00 PM
  • BARN's Small Classroom, class code: ME110221DH
  • 5


Registration is closed
*Prerequisites required for this class. Please see below.

The Manufacturing section of Fusion 360 is an essential element of using BARN’s CNC machines. In this class, you’ll learn about:

  • Setup (Machine), Stock, and Post Processor tabs of Setups.
  • The various Mill and Turn (lathe) operations available, and when to use.
  • Tool Libraries and their relationship to the integrated tools in the CNC machines.
  • Post Processors, what they are, and how they are used.

Knowing how to utilize the CAM functions is a big step toward using our CNC machines, and is required to produce useful g-code.This class is REQUIRED if you want access to the CNC Mill or Lathe in the Machine Shop.


  • Prerequisites: Fusion 360 competency.
  • BARN is practicing safety measures for the health and well-being of all participants, in accordance with state and CDC guidelines. Please click here to read more.
  • Tuition assistance is available. Click here to apply.

Instructor Bio: As a young man, David Hays worked as a machinist while gaining his engineering degrees, and went on in his later years to create his own hobby machine shop that included a DIY CNC mill.

Contact: David Hays [email protected]

© Bainbridge Artisan Resource Network
Powered by Wild Apricot Membership Software
/ /